SIMON FRASER UNIVERSITY
?
MEMORANDUM
To: Senate
?
From:
Senate Committee on
Undergraduate Studies
Subject:
School of Engineering Science -
?
Date:
November 14, 1985
Curriculum Revisions
Action undertaken by the Senate Committee on Undergraduate Studies at its
meeting of November 12, 1985 gives rise to the following motion:
MOT I ON:
"That Senate approve and recommend approval to the Board of
Governors, as set forth in
S.86-1,
the proposed curriculum
revisions in Engineering Science."
L
SiMON FRASER
MEMORANDUM
UNIVERSITY
SCu ?
S3
To
Mr. R. Heath, Registrar
Secretary to the Senate Committee on
Studies
......................
Subject..
.c'2Sc.
?
çi.nn ?
Revisions. (ASU. 85-4).
From.
cJt Blanchet.
,
Administrative
Assistant,
Fci1.l.
y
.
•ç,•f
.Sp.p1cI.
Date..NQY't.
4,. ?
............................
At a meeting of the Faculty of Applied Sciences held on
Tuesday, October 29, 1985 the attached curriculum revisions in Engineering Science
were approved.
Would you please place this item on the next agenda of the
Senate Committee on Undergraduate Studies.
JB
Enclosure.
'
?
-
SIMON FRASER UNIVERSITY
?
MEMORANDUM
To
Applie...c
.
i
Undergraauate Curriculum
Committee
Subject. .
?
9'''. .
?
. n
Engineering Science.
From .......
Dr....A..
.
eorge
?
Director
.cic
Date
.
2
4..P9
.......
tp . b
r..1985 ......................
Since the original Engineering Science
proposal and with
two years experience in offering the program, a number of formal
changes have become necessary. While extensive in nature these
changes contain little of groat substance.
(1)
The
lower division Engineering Science
courses have had
their content, sequencing and course numbers changed in
the light of experience. The total content of the three
courses has not changed except that electrical engineering
topics have been dropped in favour of an introduction to
discrete time systems.
(2)
Separate laboratory courses have been dropped in favour
of integrated lecture-laboratory courses as a convenience
for faculty, students and administration.
(3)
Each option in the original proposal featured a complex
selection of highly constrained electives. This has been
changed to a list of required courses plus a selection
of less tightly constrained electives.
(4)
Prerequisite and course changes introduced since the origi-
nal proposals by other departments have been incorporated.
/Donald A. George, Director
DAG:mm
Attadhment
.
2
S
24 October 1985
Program Changes ?
Engineering Science
Program changes are restricted to the course content of
each option, except that the Engineering Mathematics option
has not been offered and will be dropped from the Calendar.
Students will be advised on the selection of electives to follow
a mathematics concentration or a robotics concentration within
the Electronics Engineering option. The term "Electronics Engin-
eering" is proposed to replace "Electronics and Communications"
in the interest of better general understanding of the nature
of this option.
Previously, both a course listing and a typical course
schedule were used to describe the program options. The latter
has proven to be much more widely used so the course listing
description has been dropped.
The attached typical course schedules define the program
with the proposed changes incorporated. It will be noted that
these are arranged so that the first four semesters are common
to all options. Specific changes to each option are described
below:
(A) All o
ptions
(where relevant)
(1) ENSC 125-5, 222-5, 280-5 replace ENSC 280-3, 225-3,
322-3, 291-2, 292-2, 293-2. Course proposal forms
attached detail these changes.
•
?
?
(2) ENSC 280-3 is no longer identified in the mathematics?
category and a mathematics elective is added.
IQ
2
(3)
ENSC ?
321-4, ?
327-4, ?
382-4 ?
replace ?
ENSC 421-3, ?
427-3,
382-3 respectively through the incorporation of a labora-
tory
?
requirement. ?
Lab ?
courses ?
ENSC ?
291-2 ?
to 494-2
will ?
be ?
changed to 491-1, 492-2, 493-3 and 494-4; Spe-
cial Laboratory projects courses.
(4)
ENSC ?
101-0 to 10-0 are established in order to provide
scheduled time for ENSC 100-6 throughout the program.
(5)
CMPT ?
290-3 ?
replaces ?
291-4 ?
and CMPT-390-3 is added as
a ?
requirement, ?
all
?
as consequences of program changes
in Computing Science.
(6)
PHYS ?
324-3 ?
replaces ?
PHYS ?
425-3 ?
which ?
was used as a
placeholder ?
for ?
an ?
electromagnetic course in the pro-
gram.
(7)
CMPT 118
is
no longer offered.
(8)
ENSC ?
498-3 ?
and ?
499-9 ?
replace the project course ENSC
499-11. ?
The ?
additional
?
semester hour credit reflects
the new requirement for a formal project proposal.
(9)
ENSC ?
324-3 ?
will ?
not be offered.
?
It is likely another
electronics course will be introduced in the future.
(B) Electronics Engineering
(1) MATH 243-3 is dropped as a required course because
similar material is covered in CMPT 205-3 and there
are a number of other relevant MATH and MACN courses.
It is replaced by a mathematics elective.
4
?
.
3
(2)
PHYS 355-3 is dropped as a required course in favour
of a science elective (i.e. a basic, applied or mathe-
matical science) in order to provide a broader elective
choice for the student.
(3)
The structured elective choices involving CMPT 205,
301, WA, 400, 401, 405, 491 and 492 are replaced by
two Computing Science electives drawn from an extensive
list of CMPT courses. MACM 401 is moved to be a mathe-
matics elective.
(4)
The structured elective choices involving ENSC courses
are replaced by three Engineering Science electives
chosen from ENSC 425, 426, 428 and 429. Details on
changes to these four courses are attached.
(C) Engineering Ph
y sics (Electronics)
(1)
Elective selection from PHYS 365, 384, 415, 425, 465
and CHEM 465 is replaced by a requirement for PHYS
365, 465, 324.
(2)
Elective selection of six of ENSC 324, 382, 421, 425,
426, 426, 429 is replaced by a requirement for ENSC
321, 327 and 382 and election of three of ENSC 425,
426, 428 and 429.
(3)
ENSC 495 provides for a basic acquaintance with micro-
electronics fabrication.
(D) Com
puter
Engineering
(1) As for (1) under Electronics Engineering.
4
(2)
CNPT 301 has been changed so as to be no longer relevant
to ?
the ?
program. ?
It is replaced by a Computing Science
elective. ?
CMPT 354 is also moved to the elective list.
Specific
?
requirements
?
for ?
laboratory courses CMPT 495
and 496 are dropped.
(3) CMPT ?
404 ?
and
?
405 ?
are
?
moved to the elective list and
CMPT 401 is added as a required course.
(4)
Restrictive
?
electives
?
involving ?
CMPT ?
390, ?
392, 491,
MACN ?
401 ?
and ?
PHYS ?
355 ?
are ?
dropped. ?
(Note that the
program ?
contains ?
two ?
Computing ?
Science electives and
one science elective.)
(5) •
Restrictive
?
electives
?
involving ?
ENSC ?
382, ?
425, 427,
428, ?
429 ?
is ?
dropped ?
in ?
favour ?
of the choice of two
of
?
ENSC ?
425, ?
426, ?
428
with
328, 429 and 382 becoming
required.
(E) Biomedical En
g ineerin g
(Electronics)
(1)
Updating of prerequisite requirements has led to moving
KIN. 305, 306, 407, 442 from requirements to two or
more electives (as allowed by the individual's prerequi-
site circumstances). BISC 101, 102 become required
and CHEM 251, 256 and 261 become available only as
electives. KIN. 401, 402 and 480 become available
as electives.
(2) ENSC 385 will not be available. ENSC 327 and 321 move
from the restrictive elective list to become required.
Two electives must be chosen from 425, 426, 428 and 429.
C ' ?
.
S.F.U.
S
CORE 'A' ENGINEERING
COURSES AND TYPICAL SCHEDULE
?
September 11, 1985
SEMESTER ONE
CHEM 104-3
?
General Chemistry I
CHEM 115-2 ?
General Chemistry Laboratory I
Cmpl 1-3 ?
first complementary studies elective
CMPT 101-4 ?
Intro, to High Level Programming Language
MATH 151-3 ?
Calculus I
PHYS 120-3 ?
Physics I
18 semester hours credit
SEMESTER TWO
CHEM 105-3 ?
General Chemistry II
CMPT 105-3 ?
Fundamental Concepts of Computing
ENSC 125-5 ?
Basic Electronics Engineering
MATH 152-3
?
Calculus II
PHYS 121-3 ?
Physics II
PHYS 131-2 ?
General Physics Laboratory
19 semester hours credit
SEMESTER THREE
Cmpl 11-3
?
second complementary studies elective
CMPT 290-3
?
Introduction to Digital Circuit Design
ENSC 222-5 ?
Electronic Design I
MATH 232-3 ?
Elementary Linear Algebra
S
MATH 251-3 ?
Calculus III
PHYS 221-3 ?
Intermediate Electricity and Magnetism
20 semester hours credit
SEMESTER FOUR
CMPT 201-4 ?
Data and Program Organization
CMPT 390-3 ?
Digital Circuits and Systems
ECON 200-3 ?
Principles of Economics I - Microeconomic Principles
ENSC 280-5 ?
Systems Dynamics
Math 1-3
?
first Mathematics elective(1)
MATH 272-3 ?
Introduction to Probability and Statistics I
21 semester hours credit
(l) For Electronics Engineering and Engineering Physics, MATH 252-3 is
a required prerequisite and should be taken here.
.
7
S.F.U.
ELECTRONICS ENGINEERING
COURSES AND TYPICAL SCHEDULE
?
September 11, 1985
SEMESTER FIVE
Cmpl 111-3 ?
third complementary studies elective
Cmpt 1-3 ?
first Computing Science elective
CMPT 391-3 ?
Microcomputer Hardware Workshop
ENSC 300-3 ?
Engineering Design and Management
ENSC 321-4 ?
Electronic Design II
Math 11-3 ?
second Mathematics elective
19 semester hours credit
SEMESTER SIX
Cmpt 11-3
?
second Computing Science elective
CMPT 393-4 ?
Systems Software for Minicomputers and Microcomputers
ENSC 301-3 ?
Engineering Economics
ENSC 327-4 ?
Communication Systems
PHYS 324-3
?
Electromagnetics
Scie ?
1-3 ?
first science elective(2)
20 semester hours credit
SEMESTER SEVEN
• ?
Cmpl IV-3
?
fourth complementary studies elective
Ensc 1-4
?
first Engineering Science elective(3)
ENSC 382-4 ?
Control System Design
ENSC 498-3 ?
Industrial Internship II
Scie 11-3
?
second science elective(2)
Scie 111-3 ?
third science elective(2)
20 semester hours credit
ENSC
SEMESTER
100-6EIGHT ??
Engineering Communications(4)
S
Ensc 11-4
?
second Engineering Science elective(3)
Ensc 111-4 ?
third Engineering Science elective(3)
ENSC 499-9
?
Engineering Science Project
?
23 semester hours credit
TOTAL 160 semester hours credit
(2)
an approved course in a basic, applied or mathematical science
(3) chosen from:
ENSC 425-4 Electronic System Design
ENSC 426-4 High Frequency Electronics
ENSC 428-4 Data Communications
ENSC 429-4 Discrete Time Systems
With permission, one or more Directed Studies courses may be chosen
in this elective category.
(4)
taken throughout the program, with formal registration in
Semester 8, so nominal semester workload is 17 hours.
L
E:i
S. F. U.
S
?
ROBOTICS CONCENTRATION September 11, 1985
The Electronics Engineering program includes a concentration
in Robotics as an optional field of study. It is recommended that
students interested in Robotics utilize their elective courses as
follows:
?
Scie 1-3 ?
PHYS 211-3 Intermediate Mechanics
?
Scie 11-3 ?
two of PHYS 355-3 Optics
?
& Scie 111-3 ?
KIN. 100-3 Introduction to Human
Function and Structure
KIN. 401-3 Mechanics of Human Movement
?
Cmpt 1-3
?
CMPT 410-3 Artificial Intelligence Survey
?
Cinpt 11-3
?
CMPT 384-3 Symbolic Computing
or CMPT 380-3 Computational Linguistics
or CMPT 411-3 Artificial Intelligence Topics
Math
1-3
MATH
252-3
Vector Calculus I
Math
11-3
CMPT
205-3
Introduction to Formal Topics
in Computing Science
Ensc
1-4
ENSC 460-4
Special Topics I - Robotics
Ensc
•
11-4
ENSC
461-4
Special Topics II - Robotics
Ensc
111-4
as specified
for Electronics Engineering
0
S.F.U.
September 11, 1985
MATHEMATICS CONCENTRATION
The Electronics Engineering program includes a concentration
in Mathematics as an optional field of study. It is recommended
that students interested in Mathematics utilize their elective
courses as follows:
Scie
1-3
three of: MACM
316-3
Numerical Analysis I
& Scie
11-3
MATH
308-3
Linear Programming
& Scie
111-3
MATH
309-3
Continuous Optimizations
MATH
322-3
Complex Variables
MATH
310-3
Introduction to Ordinary
Differential Equations
MATH
387-3
Stochastic Processes
Cmpt
1-3
MATH 243-3
?
Discrete
Mathematics
Cmpt
11-3
open Computing
Science elective
Math
1-3
MATH 252-3 ?
Vector Calculus I
Math
11-3
open Mathematics elective
Ensc 1-4
?
as specified for Electronics Engineering
•
?
?
Ensc 11-4
Ensc 111-4
S.F.U.
*COUR
SES
?
ENGINEERING PHYSICS (ELECTRONICS)
AND TYPICAL SCHEDULE
?
September 11, 1985
SEMESTER FIVE
Cmpl 111-3 ?
third complementary studies elective
CMPT 391-3
?
Microcomputer Hardware Workshop
ENSC 300-3 ?
Engineering Design and Management
ENSC 321-4 ?
Electronic Design II
Math 11-3 ?
second Mathematics elective
PHYS 211-3 ?
Intermediate Mechanics
19 semester hours credit
SEMESTER SIX
ENSC 301-3
Engineering Economics
ENSC
327-4
Communication Systems
PHYS
324-3
Electromagnetics
PHYS
344-3
Thermal Physics
PHYS
355-3
Optics
PHYS
385-3
Quantum Physics
19 semester hours credit
SEMESTER SEVEN
?
CInpi
IV-3 ?
fourth complementary studies elective
?
Ensc 1-4
?
first Engineering Science elective(3)
?
ENSC 382-4
?
Control System Design
?
ENSC 495-1 ?
Introduction to Microelectronic Fabrication
?
•
ENSC 498-3 ?
Industrial Internship II
?
?
PHYS 365-3 ?
Semiconductor Physics
18 semester hours credit
SEMESTER EIGHT
?
Ensc 11-4
?
second Engineering Science elective(3)
?
Ensc 111-4 ?
third Engineering Science elective (3)
?
ENSC
1.
100-6 ?
Engineering Communications(4)
?
ENSC 499-9 ?
Engineering Science Project
?
PHYS 465-3 ?
Solid State Physics
26 semester hours credit
TOTAL 160 semester hours credit
(2)
An approved course in a basic, applied or mathematical science
(3) Chosen from:
ENSC 425-4 Electronic System Design
ENSC 426-4 High Frequency Electronics
ENSC 428-4 Data Communications
ENSC 429-4 Discrete Time Systems
With permission, one or more Directed Studies courses may be chosen
in this elective category.
is(4) taken throughout the program, with formal registration in
Semester 8, so nominal semester workload is 20 hours.
1.
i
S.F.U.
COMPUTER ENGINEERING
COURSES AND TYPICAL SCHEDULE
?
September 11, 1985
SEMESTER FIVE
Cnipl 111-3
?
third complementary studies elective
Cmpt 1-3
?
first Computing Science elective(5)
CMPT 205-3 ?
Introduction to Formal Topics in Computing Science
CMPT 391-3
?
Microcomputer Hardware Workshop
ENSC 300-3 ?
Engineering Design and Management
ENSC 321-4
?
Electronic Design II
19 semester hours credit
SEMESTER SIX
Cmpt 11-3
?
second Computing Science elective(5)
CMPT 393-4 ?
Systems Software for Minicomputers & Microcomputers
CMPT 400-3 ?
Hardware Architecture
ENSC 301-3 ?
Engineering Economics
ENSC 327-4
?
Communication Systems
Scie ?
1-3 ?
science elective(2)
20 semester hours credit
SEMESTER SEVEN
Cmpl IV-3
?
fourth complementary studies elective
CMPT 401-3
?
Operating Systems
Ensc 1-4
?
first Engineering Science elective(3)
ENSC 382-4 ?
Control System Design
ENSC 498-3
?
Industrial Internship II
• ?
Math 11-3
?
second Mathematics elective(5)
20 semester hours credit
SEMESTER EIGHT
ENSC 100-6 ?
Engineering Communications(4)
Ensc 11-4
?
second Engineering Science elective (3)
ENSC 429-4
?
Discrete Time Systems
ENSC 499-9
?
Engineering Science Project
?
23 semester hours credit
TOTAL 160 semester hours credit
(2)
An approved course in a basic, applied or mathematical science
(3) Chosen from:
ENSC 425-4 Electronic System Design
ENSC 426-4 High Frequency Electronics
ENSC 428-4 Data Communications
With permission, one or more Directed Studies courses may be chosen
in this elective category.
(4)
taken throughout the program, with formal registration in Semester 8,
so nominal semester workload is 17 hours.
(5)
In addition to CMPT or MATH courses, as appropriate, students may elect
from: ?
MACM 306-3 Introduction to Automata Theory
MACM 401-3 Switching Theory and Logical Design
MACM 402-3 Automata and Formal Languages
L
Ij
DRAFT ?
S.F.U.
0 ?
BIOMEDICAL ENGINEERING (ELECTRONICS)
COURSES AND TYPICAL SCHEDULE
?
September 11, 1985
SEMESTER FIVE
BISC 101-4 ?
Introduction
to Biology
CMPT 391-3 ?
Microcomputer Hardware Workshop
ENSC 300-3 ?
Engineering Design and Management
ENSC 321-4 ?
Electronic Design II
KIN. .100-3 ?
Introduction
to Human Structure and Function
17 semester hours credit
SEMESTER SIX
BISC 102-4
Introduction
to Biology
Cinpl
111-3
third complementary studies elective
ENSC
301-3
Engineering Economics
ENSC
327-4
Communication
Systems
Math
11-3
second Mathematics elective
Scie
1-3
first science elective(2)
20
semester hours credit
SEMESTER SEVEN
Cinpl
IV-3
fourth complementary studies elective
Ensc
1-4
first Engineering Science elective (3)
ENSC
382-4
Control System Design
S
ENSC
498-3
Industrial Internship II
Scie
11-3
second science elective(2)
Scie
111-3
third science elective(
2)
20
semester hours credit
SEMESTER EIGHT
Ensc 11-4
?
second Engineering Science elective(3)
ENSC 100-6
?
Engineering Communications(4)
ENSC 451-3 ?
Seminar in Biomedical Engineering(5)
ENSC 499-9 ?
Engineering Science Project
Scie IV-3
?
fourth science elective 2)
?
25 semester hours credit
TOTAL 160 semester hours credit
(2) an approved course in a basic, applied or mathematical science of
which at least two must be from the following:
KIN. 305-3 Human Physiology I
KIN. 306-3 Human Physiology II
KIN. 401-4 Mechanics of Human Movement
KIN. 402-4 Mechanical Properties of Tissues
KIN. 407-3 Human Physiology Laboratory
KIN. 442-3 Biomedical Systems
KIN. 480-3 Human Factors in Working Environments
Students should note that the prerequisites for several of these
courses are not provided in the Biomedical Engineering program.
•
?
Other sections of this Calendar and, if necessary, the School of
Kinesiology should be consulted by students interested in KIN.
305, 306 and 407.
S.F.U.
BIOMEDICAL ENGINEERING (ELECTRONICS)
COURSES AND TYPICAL SCHEDULE
?
September 11, 1985
(3) Chosen from:
ENSC 425-4 Electronic System Design
ENSC 426-4 High Frequency Electronics
ENSC 428-4 Data Communications
ENSC 429-4 Discrete Time Systems
With permission, one or more Directed Studies courses may be chosen
in this elective category.
(4)
taken throughout the program, with formal registration in
Semester 8, so nominal semester workload is 19 hours.
(5)
will not be given every year; students should take at the
earliest opportunity.
13
?
r
L
En
S
COMPUTING SCIENCE COURSES
The following courses are either required, or acceptable
as electives, in Engineering Science:
CMPT
101-4
MPT
105-3
CMPT
201-4
CNPT
205-3
CMPT
275-3
CMPT
290-3
CNPT
305-3
CMPT
340-3
CMPT
351-3
CMPT
354-3
CMPT
380-3
CMPT
383-3
CMPT
384-3
CMPT
390-3
CMPT
391-3
CMPT
393-4
CMPT
400-3
CMPT
401-3
CMPT
. ?
CMPT
404-4
405-3
CMPT
406-3
CMPT
410-3
CMPT
411-3
CMPT
451-3
CMPT
483-3
CMPT
484-3
CMPT
495-3
In addition, CMPT 320-3 may be used to satisfy the
"interaction between technology and society" course
requirement or as a course in "humanities, social sciences
or administrative studies".
L
.. r
Revised Course Descriptions for EnQineerina Science
Engineering Communications
Engineering Communications is designed to develop the stu-
dent's written, verbal and graphical communication skills.
• This work is spread throughout the duration of the engin-
eering program. Grading is based not only on participation
in the various Engineering Communications activities but
also includes evaluation of laboratory reports, course
essays and project reports.
?
The student will register
• for one component of the course each semester. These
courses are graded on a pass/fail basis.
ENSC 101-0 Engineering Communications I
The
?
first
?
component ?
of Engineering Communications
for ?
students
?
in ?
the
?
first semester of the Engin-
eering Science program.
ENSC 102-1
Engineering Communications ii
The
?
second
?
component of Engineering Communications
for ?
students
?
in ?
the second semester of the Engin-
eering Science program.
ENSC 103-1
Engineering Communications iii
The ?
third
?
component ?
of Engineering Communications
for ?
students ?
in ?
the
?
third semester of the Engin-
eering Science program.
ENSC 104-1
Engineering Communications iv
The ?
fourth ?
component of Engineering Communications
for
?
students ?
in ?
the fourth semester of the Engin-
eering Science program.
ENSC 105-1
Engineering Communications V
The ?
fifth ?
component ?
of Engineering Communications
for ?
students ?
in ?
the ?
fifth semester of the Engin-
eering Science program.
ENSC 106-1
Engineering Communications vi
The ?
sixth
?
component ?
of Engineering Communications
for
?
students
?
in ?
the
?
sixth semester of the Engin-
eering Science program.
ENSC 107-1
Engineering Communications vii
The
?
seventh component of Engineering Communications
for
?
students
?
in the seventh semester of the Engin-
eering Science program.
ENSC 108-0
Engineering Communications viii
The
?
eighth ?
component of Engineering Communications
for
?
students
?
in ?
the eighth semester of the Engin-
eering Science program.
i P
1J
?
0
IN r
fj ?
C(
?
L
SENATE
COMMITTEE ON UNDERG
RA
DUATE STUDIES
NEW COURSE PROPOSAL
FORM
0
1. Calendar Information
Abbreviation Code: ENSC Course Number:101
Title of Course: ?
Engineering Communications
Calendar Description of Course:
See attached.
Department: Engineering Science-
Credit Hours: 0 ?
Vector: n/a
Nature of Course
Seminar
Prerequisites (or special instructions):
What course (courses),
if any, is being dropped from the calendar if this course is
approved: ?
ENSC 100-6
2. Scheduling
How frequently will the course be offered?
?
As required.
Semester in which the course will first be offered? 86-1
.
?
Which of your present faculty would be available to make the proposed offering
possible? ?
n/a
3.
Objectives of the Course
To allow scheduling of Engineering Communications in the first
semester of the ENSC program.
4.
Budgetary and Space Requirements (for information only)
What
additional resources will be required in the following areas:
?
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5.
A22
rov al
Date:
/f'..5 ?
?-C\ \•C
?
_________________
e
Pi-rr /
-- t
?
11
n
717 7 ^ `
^
Chairman, SCUS
SCUS 73-34b: ?
nrnp1:tin' this form, for instructions se Memorandum SCUS 7334a.
at
ta(: h (()tI
?
0111
1 I ri'
De
5. Approval
Date:
8T//02
6e
I)cpdrtrnenu Chiirnn
?
n
'
Chairman, SCUS
?
-0
SENATE
CO>1ITTEE ON
UND
ERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
1.
Calendar Information ?
Department: Engineering
SC *1
ce
Abbreviation Code: ENSC Course Number:
?
102
?
Credit Hours:
1 Vector: n/a
Title of Course: Engineering Communications
Calendar Description of Course:
See attached.
Nature of Course Seminar
Prerequisites (or special instructions):
ENSC 101
What course (courses), if any, is being dropped from the calendar if this course is
approved:
ENSC 100-6
2. Scheduling
How frequently will the course be offered?
?
As required.
Semester in which the course will first be offered?
?
Fall 1986
Which of your present faculty would be available to make the proposed offering
possible? ?
n/a
3.
Objectives of the Course
To improve ENSC students' communications skills.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
attach
SCUS 7-41):
((I:r
?
?
()uL
(.'h '
I
n ?
fl')
rnp t i n lhi.s irm,
for
instructions see Memorandum SCUS 7334a.
SENATE CO1ITTEE ON UNDERGRADUATE STUDIES
. ?
NEW COURSE PROPOSAL FORM
1. Calendar Information
Abbreviation Code: ENSC Course Number:103
Title of Course: ?
Engineering Communications
Calendar Description of Course:
Department: Engineering Science
Credit Hours: 1 Vector:
fl/a
See attached.
Nature of Course
Seminar
Prerequisites (or special instructions):
ENSC 102
What course (courses), if any, is being dropped from the calendar if this course is
approved:
ENSC 100-6
2. Scheduling
How frequently will the course be offered?
?
As required.
Semester in which the course will first be offered?
?
Fall 1986
?
Which of your present faculty would be available to make the proposed offering
possible? ?
n/a
3.
Objectives of the Course
To improve ENSC students' communications skills.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
NIL ?
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. pproval
Date: ?
/"..25
Depar menL Chairman
? an ?
Chairman, SCUS
SCUS 73-34b: (
y
:n ccnjJeting this form, for instructions see Memorandum SC1JS
73-34a.
sk
SENATE C01ITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
1.
Calendar Information ?
Department:
Engineering Sc
?
cc
Abbreviation Code: ENSC
Course Number: 104
?
Credit Hours: 1 Vector:
fl/a
Title of Course:
Engineering Communications
Calendar Description of Course:
See attached.
Nature of Course
Seminar
Prerequisites (or special instructions):
ENSC 103
What course (courses), if any, is being dropped from the calendar if this course is
approved:
ENSC 100-6
2. Scheduling
How frequently will the course be offered?
?
As required.
Semester in which the course will first be offered?
?
Fall 1986
Which of your present faculty would be available to make the proposed offering
possible? ?
n/a
3.
Objectives of the Course
To improve ENSC students' communications skills.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date:
Chairman, SCUS
atta(:h
SCUS 7
u(ir
-b:
?
(.:eri r:rn ?
t i n this form, for instruction
sue
Memorandum
SCUS 73--36a. ?
SENATE CO'1ITTEE ON UNDERGRADUATE
__.
?
STUDIE
-
S
NEW COURSE PROPOSAL FORM
•
l.
Calendar Information
Abbreviation Code: ENSC Course Number:105
Title of Course: ?
E
ngineering Communications
Calendar Description of Course:
See attached.
-1
Department: Engineering Science
Credit Hours: 1Vec t
or: n/a
Nature of Course
Seminar
Prerequisites (or special instructions):
ENSC 104
What course (courses), if any, is being dropped from the calendar if this course is
approved:
ENSC 100-6
2. Scheduling
How frequently will the course be offered?
?
As required.
Semester in which the course will first be offered?
?
Fall 1986
•
Which of your present faculty would be available to make the proposed offering
possible? ?
n/a
3.
Objectives of the Course
To
improve ENSC students' communications skills.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
3-71ç2 5:
—
?
-
I - "
,par inenL iii IrrIn -
?
'- ?
1J9fl-) L
?
Chairman, SCUS
?
- ?
21
flt
SCUS
ta(:
73-34b:
h ?
:ii r
?
?
('}
?
I in(.)(:(mp!
('t i
?
Ihis 1rm, for instructions see Memorandum
scus
73-34a.
LK
SENATE CO>•1ITTEE ON
UNDERCRADuvrE
STUDIES?
NEW COURSE PROPOSAL FORM
1.
Calendar Information
?
Department:
Engineering
sciAme
Abbreviation Code:
ENSC
Course Number: ?
106
?
Credit Hours:1 Vector:
flaW'
Title of Course:
Engineering Communications
Calendar Description of Course:
See attached.
Nature of Course
Seminar
Prerequisites (or special instructions):
ENSC 105
What course (courses), if any, is being dropped from the calendar if this course is
approved:
ENSC
100-6
2. Scheduling
How frequently will the course be offered?
?
As
required.
Semester in which the course will first be offered?
?
Fall 1986
Which of your present faculty would be available to make the proposed offering
possible?
?
n/a
3.
Objectives of the Course
To improve Et'JSC students
,
communications skills.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
.
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date:
?
/( 125
;-
çTE
LT(--partm( - -nt: Chairman--.-.-
?
--,Ded
Chairman, SUS
attach
SCUS
7 3-41):
:'c
r
?
?
'':
C.': j 1, U :Urri;! t. ir' this form, For Inst rtJ.:t iflns
?
M,mranth,m SCIJS 73-'3/4a.
SENATE CO>IlTTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
1. Calendar Information
Abbreviation Code: ENSC Course Number:107
Title of Course:
Engineering
Communications
Calendar Description of Course:
See attached.
Department:
Engineering
Science
Credit Hours:
1
Vector: n/a
Nature of Course
Seminar
Prerequisites (or special instructions):
ENSC 106
What
approved:
course (courses), if any, is being dropped from the calendar if this course is
ENSC 100-6
2. Schedul
in g
How frequently will the course be offered?
?
As required:
Semester in which the course will first be offered?
?
Fall 1986
Which
possible?of ?
your
n/a
present faculty would be available to make the proposed offering
3.
obje
c
tives of the Course
To improve ENSC students'
communications
skills.
4.
Bud
g
etary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5.
A22
rova
l
Date:
. ?
2 ?
Chairman,
at
SCUS
t fl(:
1
7
1
34b:
(', ?
?
(•:ri
n(.)
(:()mph:tJn11 this form, for instructions see Memorandum SCUS 73-34a.
ML
Chairman, SCUS
SENATE COMNITTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
1. Calendar Information
?
Department:Engineering Scie
Abbreviation Code: ENSC Course Number: 108
?
Credit Hours: 0
Vector:
fl/as
Title of Course: Engineering Communications
Calendar Description of Course:
See attached.
Nature of Course Seminar
Prerequisites (or special ihstructions):
ENSC
1b7
What course (courses), if any, is being diopped from the calendar if this course is
approved:
ENSC 100-6
2.
Scheduling
How frequently will the course be offered
? ?
As required
Semester in which the course will first be offered?
?
Fall 1986
Which of your present faculty would be available to make the proposed offering
possible?
?
'n/a
3.
Objectives of the Course
To allow scheduling of Engineering Communications in the eight
semester of the ENSC program.
.'
4. Budgetary and Space Requirements (for information only)
What additional resources will be required In the following areas: NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date:________
Deprit Chairmnn
SCUS 7'-'/,:
?
('.'i:n
:Trp
?
.
in
?
ihi ?
ürrn, for instrw:t ir;• Memur;ln(jIlrn SCIJS
-It tfl'1) (:'I1
r; ?
r;'7 ?
i:':')
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
•l. Calendar Information
?
NEW
COURSE PROPOSAL FORM
Department:
Engineering
Science
Abbreviation Code:
ENSC
Course
Number: 125
?
Credit Hours:
5
Vector: 3-0-4
Title of Course: Basic Electronics Engineering
Calendar Description of Course:
See Attached.
Nature of Course
?
Lecture/Laboratory
Prerequisites (or special instructions):
PHYS 121, 131
Co-requisite: MATH 251
What course (courses), if any, is being dropped from the calendar if this course is
approved: ?
ENSC 225-3 and 291-2
2. Scheduling
How frequently will the course be offered? Once per year
Semester in which the course will first be offered? 86-3
. Which of your present faculty would be available to make
the proposed offering
possible? All
3.
Objectives of the Course
To give students both a general introduction to the area of electronics engineerinq
and a solid basis in the fundamentals on which all other ENSC courses build.
4.
Budgetary and Space Requirements (for information only)
What additional resources will
be required in the following areas:
None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date:
- ?
Chairman, SCUS
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach course outline).
.
ENSC 125-5 Basic Electronics Engineering
?
[replaces ENSC 225-3 & 291-2]
[3,0,4]
?
Nature and properties of electrical circuits; basic circuit
elements; voltage and current sources; Kirchoff's laws; linearity
and superposition; Thevenin and Norton Theorems. DC circuits. AC
signals and phasors. AC steady state circuit analysis: impedance,
admittance and transfer properties; frequency response; detailed
treatment of first order (RL and RC) circuits; properties of LCR
circuits. Basic characteristics of diodes and the transistor as a
switch, with applications. Introduction to transient response. Basics
of feedback control, communication and digital systems. Two
semester-hours credit in laboratory work is included in this course.
Prerequisites: PHYS 121, 131.
Corequisites: MATH 251
1)
0
Chairman, SCUS
DtTOI\L
NA/&E
--O€EQ.
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
. ?
NEW COURSE PROPOSAL FORM
1.
Calendar Information ?
Department:Engineering Science
Abbreviation Code:ENSC Course Number: 195
?
Credit Hours: 0 Vector: n/a
Title of Course: Job Practicum I
Calendar Description of Course:
S€u
Attached.
Nature of Course
?
Practicum
Prerequisites (or special instructions):
Students must register with the School Internship Coordinator
by the end of the third week of the semester Preceding the work semester.
What course (courses), if any, is being dropped from the calendar if this course is
approved:
2.
Scheduling
How frequently will the course be offered? As required
Semester in which the course will first be offered? 86-2
. Which of your present faculty would be available to make the proposed offering
possible?
?
n/a
3.
Objectives of the Course
To provide extended Job Practicum opportunities in ENSC program
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
I"i;
?
( \
.
Chai)nian
L
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a
attach course outline).
.
ENSC 195-0 Job Práctjcum I
This is a first semester of optional work experience in the
Industrial Internship program available to engineering students.
Credit is given as Pass/Withdraw (P,W) only, based on the employer's
valuation of the student's work during the semester and of the work
report submitted at the end
of
the work session.
Prerequisite: students must register
with
the School Internship
Coordinator by the end
of
the third week of
the
semester preôeding the
work semester.
28
0
EbT61f
1 -
?
tJE:
TO PREREUtS(7E
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
. ?
NEW COURSE PROPOSAL FORM
1. Calendar Information
Abbreviation Code:ENSC
Course
Number: 196
Title of Course:
?
Job Practicum IT
Department: Engineerin
g
Science
Credit HoursP
?
Vector p/'a
Calendar Description of Course:
See Attached.
Nature of Course
?
Practicum
Prerequisites (or special instructions):
ENSC 195. Students must register with the School Internshio Coordinator
by the end of the third week of the semester preceding the work semester.
What course (courses), if any, is being dropped
from the calendar if
this course is
approved:
2. Scheduling
How frequently will the course be offered? As required
Semester in which the course will first be offered? 86-2
Which of your present faculty would be available to make the proposed offering
possible?
?
n/a
3.
Objectives of the Course
To provide extended Job Practicum opportunities in ENSC program
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5.
fl'
Date:
?
J1'cc
Department dirrifnian
?
Chairman, SCUS
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 7334a.
-r
?
(t 1
1flO'
ENSC 196-0 Job Practjcum II
This is the second semester of optional work experience in the
Industrial Internship program available to engineering students.
Credit is awarded as in ENSC 195; ENSC 196 may or may not involve the
same employer as ENSC 195.
Prerequisite: ENSC 195. Students must
apply to the School Internship coordinator by the end of the third
week of the semester preceding the work session.
.
a
0
-
SENATE COMMITTEE
NEW COURSE
ON
PROPOSAL
UNDERGRADUATE
FORM
STUDIES
S. Calendar Information
Department
:Engineering Science
Credit Hours: 5 Vector:
3-0-4
Abbreviation Code:ENSC
Course
Number: 222
Title of Course:
?
Electronic Design I
Calendar Description of Course:
See Attached.
Nature of Course Lecture/Laboratory
Prerequisites (or special instructions):
CMPT 291, ENSC 125
What course (courses), if any, is being dropped from the calendar if this course is
approved:
?
ENS(- 3223 and 292-2
2. Scheduling
How frequently will the course be offered? Once per year.
Semester in which the course will first be offered? 86-3
.
Which of your present faculty would be available
to make
the proposed offering
possible?
?
All
3. Objectives -of the Course
To introduce students to a broad range of electronic components and techniques for
desi
g
ning electronic systems
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following
areas:
None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5.
Approval
Date: ?
jt
Uc
De'p'irtment Ghaiman
?
De_-
?
Chairman, SCIJS
',r• -
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach Course outline).
.
ENSC 222-5 Electronic Design I
?
[replaces ENSC 322-3 & 292-2]
[3,0,4]
?
?
Builds upon the material of CMPT 290-3 and ENSC 125-5 with an emphasis
?
on the design of analog electronics. Topics: review of linear circuit
analysis, electronic circuit simulation program (PSpice); non-linear
characteristics and models of diodes; non-ideal performance of
operational amplifiers, non-linear applications of diodes and
operational amplifiers; active filters; biopolar junction transistors
(BJT's), junction field-effect transistors (JFET's) and
metal-oxide-semiconductor field-effect transistors (MOSFET's):
qualitative device physics and terminal characteristics, transistors
as switching elements; linear application, biasing, temperature
effects and compensation; single-stage and multistage transistor
amplifiers and differential stages. Two semester-hours credit in
laboratory work is included in this course.
Prerequisites: CMPT 291, ENSC 125
32
0
Chairman, SCUS
ENATE COMMITTEE ON UNDERGRADUATE STUDIES
S1. Calendar Information
?
NEW COURSE PROPOSAL FORM
Department: nqineeririg Science
Abbreviation Code:
ENSC Course Number:
?
280
?
Credit Hours:
?
Vector: 3-0-4
Title of Course:
?
Systems Dynamics
Calendar Description of Course:
See Attached.
Nature of Course ?
Lecture/Laboratory
Prerequisites (or special instructions):
MATH 152, 232
EN-SC 125. 222
What course (courses), if any, is being dropped from the calendar if this course is
approved:
ENSC 280 293
2. Scheduling
How frequently will the course be offered? Once per year.
Semester in which the course will first be offered? 86-3
. Which of your present faculty would be available to make the proposed offering
possible? ?
All
3.
Objectives of the Course
Gives the student a basic understaridign of time and frequency analysis of linear dynamic
systems in pre
p
aration for later communication, control and signal processing courses
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
ji ?
t53
?
t m
01ft ?
alrma n
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach course' outUne).
ENSC 280-5 Systems Dynamics
?
[replaces ENSC 280-3 & 293-2]
[3,0,4] ?
Basic tools for modelling, analysis and design of linear dynamic
systems. Introduces the student to: linearity and linearization of
sytems, block diagrams and other basic modelling concepts; impulse
response, step response, and convolution as general time domain
descriptions, FIR and hR systems; differential and difference
equations for finite order systems, simulation diagrams; transform
analysis (Laplace, Fourier, Z) and transfer functions as general
frequency domain descriptions; discrete time approximations of
continuous time systems. Laboratory projects include digital
filtering, servo systems and system simulation packages. Two
semester-hours credit in laboratory work is included in this course.
Prerequisites: MATH 152, 232
ENSC 125, 222
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
0.
Calendar Information
Abbreviation Code:
ENSC
Course Number:
295
Title of Course:
Job Practicurn III
Calendar Description of Course:
See attached.
Department:
Engineering Science
Credit Hours:0 Vector:
n/a
Nature of Course
Practicum
Prerequisites (or special instructions):
Completion of second year
What course (courses), if any, is being dropped from the calendar if this course is
approved:
None
2. Scheduling
How frequently will the course be offered?
?
As required
Semester in which the course will first be offered?
?
862
• Which of your present faculty would be available to make the proposed offering
possible?
n.a.
3.
Objectives of the Course
To provide extended Job Practicum opportunities in ENSC program.
4.
Budgetary and Space Requirements (for information only)
What additional resources
will be required in the following areas:
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
-
•
"Department Chairman
I
A/.1
35
?
Chairman, SCUS
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach coursi' outline).
ENSC 295-0 Job Practicum III
this is the third semester of optional work experience in the
Industrial Internship program available to engineering students.
Credit is awarded as in ENSC 195. ENSC 295 may or may not involve the
same employers as preceding practicum semesters.
Prerequisite: completion of second year.
Students must apply to. the School Internship coordinator by the end of
the third week of the semester preceding the work session.
36
0
Chairman, SCUS
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
0
1. Calendar Information
Abbreviation Code:ENSC Course Number:
—
296
Title of Course: Job Practicum IV
Calendar Description of Course:
See attached.
Department: Engineer jng_Science
Credit Hours: 0 Vector:n/a
Nature of Course
?
Practicum
Prerequisites (or special instructions):
ENSC 295. Students must apply to the School Internship Coordinator
by the end of the third week of the semester preceding the work session.
What course (courses), if any, is being dropped from the calendar if this course is
approved:
None
2. Scheduling
How frequently will the course be offered? As required.
Semester in which the course will first be offered?
?
86-2
. ?
Which of your present faculty would be available to make the proposed offering
possible?
n.a.
3.
Objectives of the Course
To provide extended Job Practicum opportunities in ENSC program.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval ?
Date:
• ___________
Department Chairman
SCUS 73-34b: (When completing this form, for instructions see Memorandum scus 73-34a.
attach course outline).
ENSC 296-0 Job Practicuni IV
This is the fourth semester of optional work experience in the
Industrial Internship program available to engineering students.
Credit is awarded as in ENSC 195. ENSC 296 may or may not involve the
same employers as preceding practicum semesters.
Prerequisite: ENSC 295. Students must
apply to the School Internship coordinator by the end of the third
week of the semester preceding the work session.
is
38
?
0
Et-ORnL tiR&S
QQEEU,7
?
R/JI*T
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
1. Calendar Information
?
Department:
En
qineerino Science
Abbreviation Code:ENSC
Course
Number: 300
?
Credit Hours:
?
Vector: 2-2-0
Title of
Course:
Engineering Design & Management
Calendar Description of Course:
See Attached.
Nature of Course
?
Lecture
Prerequisites (or special instructions):
Upper Division Standing
What course (courses), if any, is being dropped from the calendar if this course is
approved:
2. Scheduling
How frequently will the course be offered? Once per year.
Semester in which the course will first be offered? 86-3
Which of your present faculty would be available to make the proposed offering
possible? This course is intended to be taught by
specialist brought in from industry on
d
sessional 'as1s
3.
Objectives of the Course
To expose students to the role of the engineer as a manager. To show engineering
design as a process and to relate the engineering department to the rest of the
organization.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None-
Faculty
Staff
Library
Audio Visual
Space
Equipment
5.
,
App rova
l
Date:
Department Chairman
?
3
D
ean
?
Chairman, SCUS
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
.
ENSC 300-3 Engineering Design and Management
[2,2,0] ?
M introduction and overview of modern concepts of engineering design,
problem solving and management. Material is presented through
lectures, seminars, case studies, and historical review. Studies
involve the interrelationship of such factors as problem definition,
feasibility studies, specification, constraints, analysis techniques,
evaluation production project management conflict resolution
techniques of supervision Student participation is expected through
presentations of independent readings, case analyses and group
projects.
Prerequisite: Upper Division Standing
?
0
ii 0
P
e
EEc
utT
CH,1k&
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
.
1. Calendar Information
Abbreviation Code: ENSC Course Number:301
Title of Course: ?
Engineering Economics
Calendar Description of Course:
See Attached
Department: Engineering Science
Credit Hours: 3 Vector: 3-0-0
Nature of Course
?
Lecture
Prerequisites (or special instructions):
Upper Division Standing
What course (courses), if any, is being dropped from the calendar if this course is
approved:
2. Scheduling
How frequently will the course be offered? Once p
er year
Semester in which the course will first be offered?
?
87--1
Which of your present faculty would be available to make the proposed offering
possible? This course is intunded to be taught by specialists brought in
from industry on a sessional basis.
3.
Objectives of the Course
To expose students to the financial asuects of the business of engineering.
4. Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
Faculty
Staff
Library
Audio Visual
Space
Equipment
None.
5.
Date:
?
Is'\ G'
-
b!pa r t me
I)
?
ía
?
41
?
-.----
?
Chairman, SCUS
SCUS 73-34b:
?
(Mit.'n c1111)1eting
this form, for instructions see Memorandum SCUS 73-34a.
..........
n
ENSC 301-3 Engineering Economics
[3,0,0]
?
The engineer as a businessman and entrepreneur. Preparation of a
business plan. The economics of capital projects and production
processes. Financial analysis, mortgages, loans, direct costs,
depreciation, taxes, financial statements, financing alternatives.
Estimation of sales, capital and operating costs of new processes and
products. Cash flows. Market evaluation. Comparision of
alternatives. Study is in part through independent reading rather
than formal lectures.
Prerequisite: Upper Division Standing
?
.
*1
r
L
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE
PROPOSAL FORM
40
1. Calendar Information
Abbreviation Code: ENSC Course Number: 321
Title of Course:
?
Electronic Design II
Calendar Description of Course:
ee Attached.
Department: Engineering Science
Credit Hours: ' Vector: 3-0-2
Nature of Course
?
Lecture/Laboratory
Prerequisites (or special instructions):
ENSC 222
What course (courses), if any, is being dropped from the calendar if this course is
approved:
ENJSC 421-3 and 491-1
2. Scheduling
How frequently will the course be offered? Once per year.
Semester in which the course will first be offered? 86-3
. Which of your present faculty would be available to make the proposed offering
possible?
?
E.
9
o, A. Leung, S. Hardy, J. Cavers, D. George
3. Oblectives of the Course
To enrich the students knowledge of a broad range of electronic: components and
techniques for designing electronics systems.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
•t.• ?
-
DepàfthienC thair)an
?
Chairman, SCUS
SCUS 73-34b: When completing this form, for instructions see Memorandum SCUS 73-34a.
attach course outl foe).
ENSC 321-4 Electronic Design II
?
[replaces ENSC 421-3 & 491-1]
[3,0,2] ?
Different amplifier configurations will be analysed in detail.
Students will be introduced to analog integrated circuit design and
the analog aspects of digital electronics. Topics: high-frequency
JFET and BJT models and amplifiers; feedback amplifiers, stability and
frequency compensation, pole splitting, oscillators; tuned amplifiers:
low-noise amplifier design; integrated-circuit technology,
integrated-component characteristics and limitations, analysis of the
741 operational amplifier; logic-circuit families: Ebers-Moll model of
BJT's, DTL, TTL, ECL, 1
2
L and CMOS. Laboratory work is included in
this course.
Prerequisite: ENSC 222
44
9
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
•l. Calendar Information
Abbreviation Code: ENSC Course Number:
327
Title of Course: Communication Systems
Calendar Description of Course:
Department: Eriqirieeririq Science-
Credit Hours: 4 Vector: 3-0-2
See Attached.
Nature of Course
?
Lecture/Laboratory
Prerequisites (or special instructions):
E N S C
280.
MATH 272
What course (courses), if any, is being dropped from the calendar if this course is
approved:
?
FNSC
427-3
& 492-1
2. Scheduling
How frequently will the course be offered? Once per year
Semester in which the course will first be offered?
?
86-1
. Which of your present faculty would be available to make the proposed offering
possible? J. Cavers, P. Ho, S. Hardy, D. Georqe
3.
Objectives of the Course
Gives the student an analytical exposure to communication of waveforms in noise
drid
distortion.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. PJx_1.
Date:
?
fs ?
-
• _____
- ?
1)epartm'nt Chairman
?
.'J
?
ea n
?
Chairman, SCUS
SCUS 73-34b: (Whim complctng this form, for instructions See Memorandum SCUS 73-34a.
attach colirsu out I I ne)
.
ENSC 327-4 Communication Systems
?
[replaces ENSC 427-3 & 492-1]
[3,0,2] ?
Representation of signals; Fourier series and transforms; time and
frequency convolution. Amplitude modulation: circuits and systems,
single sideband, vestigal sideband. Angle modulation: phase and
frequency modulation, circuits and systems. Representation of random
signals: correlation, power spectra, processing in linear systems.
Effect of noise on different modulation sytems, thresholds in FM,
system design and link budgets. Digital modulation techniques and
basics of detection. Laboratory work is included in this course.
Prerequisites: ENSC 280, MATH 272
(
- t'
•i
.',
•
?
(//fli_i;
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
01. Calendar Information
Abbreviation Code: ENSC Course Number:382
Title of Course: Control System Design
Calendar Description of Course:
See
Attached.
Department: Engineering Science
Credit Hours:
4 ?
Vector: 2-0-4
Nature of Course ?
Lecture/Laboratory
Prerequisites (or special instructions):
8NSC
280
What course (courses), if any, is being dropped from the calendar if this course is
approved:
ENSC
382-3, ?
493-1
2. Scheduling
How frequently will the course be offered? Once ner year
Semester in which the course will first be offered?
?
87-1
• Which of your present faculty would be available to make the proposed offering
possible?
I.
McGeer, J. Cavers, D. George
3.
Objectives of the Course
To give the student a
p
h y
sical and mathematical introduction to the control
of systems which carl be modelled by ordinary differential equations.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
?,"
• _______
Department Chairman
ea n
?
Chairman, SCUS
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach course outline).
.
ENSC 382-4 Control System Design
?
[replaces ENSC 382-3 & 493-1]
[2,0,4] ?
Review of Laplace transform techniques. Effects of feedback:
frequency response, pole-zero positions. Compensation design: root
locus, Bode plots. State variables: formulation, solution of linear
systems. Examples of simple second-order non-linear systems. Discrete
time systems, Z-transforms, signal reconstruction, sample-and-hold
circuits. Introduction to optimum control. Laboratory work is
included in this course.
Prerequisite: ENSC 280
.
,..fl
L
4.
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
0
1. Calendar Information
Abbreviation Code: I.NSC Course Number: 395
Title of Course:
?
Job Practicum V
Calendar Description of Course:
See attached.
Department: Engineering Science
Credit Hours:
0
-Vector: n/a
Nature of Course
?
Pract-icum
Prerequisites (or special instructions):
Completion of third year. Students must apply to the School Internship
Coordinator by the end of the third week of the semester preceding the work
What course (courses), if any, is being dropped from the calendar if this course
is session.
approved:
none.
2. Scheduling
How frequently will the course be offered? As required.
Semester in which the course will first be offered?
?
86-2
.
?
Which of your present faculty would be available to make the proposed offering
possible?
n.a.
3.
Objectives of the Course
To provide extended Job Practicum opportunities in ENSC program.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
No.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. jjoval
Date: ?
I
Ne
V
5
4"/
Department Chairman
Chairman, SCUS
SCUS 73-34b: When completing this form, for instructions see Memorandum SCUS 73-34a.
attach cou rsc
011t] i tie)
ENSC 395-0 Job Practicum V
this is the fifth semester of optional work experience in the
Industrial Internship program available to engineering students.
Credit is awarded as in ENSC 195. ENSC 395 may or may not involve the
same employers as preceding practicum semsters.
Prerequisite: completion of third year.
Students must apply to the School Internship coordinator by the end of
the third week of the semester preceding the work session.
.
.
iU
?
.
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
W. Calendar Information
Abbreviation Code: ENSC
Course
Number:396
Title of Course: Job Practicum VI
Calendar Description of Course:
See attached.
Department: Engineering Science
Credit Hours: 0 Vector:n/a
Nature of Course
?
Practicum
Prerequisites (or special instructions):
ENSC 395. Studnts must apply to the School Internship Coordinator by the
end of the third week of the semester preceding the work session.
What course (courses), if any, is being dropped from the calendar if this course Is
approved: ?
None.
2. Scheduling
How frequently will the course be offered?
?
As required.
Semester in which the course will first be offered?
?
86-2
.
Which of your present faculty would be available to make the proposed offering
possible?
N.A.
3. Objectives of the Course
To provide extended Job Practicum opportunities in ENSC program.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval ?
Date:
Department Chairman
Chairman, SCUS
SCUS 73-34b:
(
1
.'heii
completing this form, for Instructions see Memorandum SCUS 73-34a.
attach
Coll]-SC
o
Ut
I hie)'.
ENSC 396-0 Job Practicum VI
This is the sixth semester of optional work experience in the
Industrial Internship program available to engineering students.
Credit is awarded as in ENSC 195. ENSC 396 may or may not involve the
same employers as preceding practicum semesters.
Prerequisite: ENSC 395. Students must
apply to the School Internship coordinator by the end of the third
week of the semester preceding the work session.
.
.
I ?
i.
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
•
l. Calendar Information ?
Department:Engineerinq Science
Abbreviation Code: ?
Course Number: 400
?
Credit Hours: _4
?
Vector:3--0-2
Title of Course:
D reel-ed Studies in .nqL-lerIJq SCIL•rlce
Calendar Description of Course:
. ?
'\ I I d(:tl(:d -
Nature of Course ?
Directed Study
?rerequisites (or special instructions):
Permission of the
Director
What course (courses), if any, is being dropped from the calendar if this course is
aproved: ?
None.
2. Scheduling
Haw frequently will the course be offered?
As required
S€ester in which the course will first be offered? 96-3
.
?Dssible?Which
of
?
your present
All
faculty would be available to make the proposed offering
3. Cectives of the Course
opportunity for
To provide furtherresearch
and study outside
of regular
courses. ?
-
4. Budgetary and Space Requirements (for information only)
1at additional resources will be required in the following areas:
?
None.
faculty
Z'aff
ra ry
!
Eo Visual
E-:tiprnent
5.
Aonroval
Late:
• ____
Department CIairman
?
_______
Chairman,
scus
L'J
5-
-
,US 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
aach
course
outline).
ENSC 400-4
Directed Studies
in Engineering
Science
[replaces ENSC
400-3]
ENSC 401-4
Directed Studies
in Engineering
Science
[replaces ENSC
401-3]
ENSC 402-4
Directed Studies
in Engineering
Science
[replaces ENSC
402-3]
[3,0,2]
Directed reading
and research in a topic chosen in consultation
with a
supervisor.
?
Admission requires
agreement by a
proposed faculty
supervisor and submission of a proposal to the
School at least one
month prior to the start of the semester in which the course will be
taken.
Prerequisite: Permission of the Director
Lj
?\. ?
J:Lfc ?
c
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
.
NEW COURSE PROPOSAL FORM
1.
Calendar Information ?
Department: _Eriqin ?
ring Science
Abbreviation Code:ENSC
?
Course Number:
40 '
?
Credit Hours: '
?
Vector: 3-0-2
Title of Course:
?
Directed Studies in Enginering Science
Calendar Description of Course:
See Attached.
Nature of Course
?
Directed Study
Prerequisites (or special instructions):
Peirnission of the Director
What course (courses),
if any, is being dropped from the calendar if this course is
approved: ?
None.
2.
Scheduling
How frequently will the course
be offered?
?
As required.
Semester in which the course
will first be offered? ?
86-3
. ?
Which of
your present faculty would be available to make the proposed offering
possible? ?
All
3. Ohiectives of the Course
To
provide opportunity for further research and study
outside of regular courses.
4. Budgetary and Space Requirements (for information only)
What
additional resources will be required in the following areas: None.
Faculty
Staff
Library
Audio
Visual
Space
Equipm
en
t
5. Aojroval
Da Ce: ?
(
?
(
J ^
a-rft`mepL
Chal7tman
?
-ean---
?
Chairman, SCUS
SCUS 73-34b:
(When
completing this
form,
for instructions see Memorandum SCUS 73-34a.
attach course outline).
.
ENSC
400-4 Directed Studies in Engineering Science
?
[replaces
ENSC
400-3]
ENSC
401-4 Directed Studies in Engineering Science
?
[replaces ENSC 401-3]
ENSC
402-4 Directed Studies in Engineering Science
?
[replaces
ENSC
402-31
[3,0,2]
?
?
Directed reading and research in a topic chosen in consultation with a
?
supervisor. Admission requires agreement by a proposed faculty
supervisor and submission of a proposal to the School at least one
month prior to the start of the semester in which the course will be
taken.
Prerequisite: Permission of the Director
?
.
56
?
0
Chairman, SCUS
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
.
?
NEW COURSE PROPOSAL FORM
1. Calendar Information ?
Department:ErlqifleeLiflq Science
Abbreviation Code:ENSC Course Number:
402 ?
Credit Hours: 4 Vector: 3-0-2
Title of Course: Directed Studies in Enqineriria Science
Calendar Description of Course:
See Attached.
Nature of Course ?
Directed Study
Prerequisites (or special instructions):
Permission of the Director
What course (courses), if any, is being dropped from the calendar if this course is
approved: ?
Nore. ?
0
2 Scheduling ?
0
How frequently will the course be offered? As required.
Semester in which the course will first be offered? 86-3
Which of your present faculty would be available to
make the
proposed offering
possible? ?
All
3.
Objectives of the Course
To provide opportunity for further research and study outside
of Legular courses.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
/ ?
,
•
?
D
?
tment C.hflirman
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
COtirs(' Ont
1
111(''
ENSC 400-4 Directed Studies in Engineering Science
?
[replaces
ENSC
400-31
ENSC
401-4 Directed Studies in Engineering Science
?
[replaces
ENSC
401-3]
ENSC
402-4 Directed Studies in Engineering Science
?
[replaces
ENSC
402-3]
[3,0,2]
?
?
Directed reading and research in a topic chosen in consultation with a?
supervisor. Admission requires agreement by a proposed faculty
supervisor and submission of a proposal to the School at least one
month prior to the start of the semester in which the course will be
taken.
Prerequisite: Permission of the Director
i8 ?
.
--
L
?
1-re.
v
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
. ?
NEW COURSE PROPOSAL FORM
1. Calendar Information ?
Department:Engineering Science
Abbreviation COde:E;NsC
?
Course Number: 425
?
Credit Hours: __Vector: 2 0-4
Title of Course:
?
Electronic System Design
Calendar Description of Course:
See Attached.
Nature of Course
?
Lecture/Laboratory
Prerequisites (or special instructions):
ENSC 222
What course (courses), if any, is being dropped from the calendar if this course Is
approved: ?
ENSC 4253 & 4941
2. Scheduling
How frequently will the course be offered?
?
once per year
Semester in which the course will first be offered?
?
87-1
Which of your present faculty would be available to make the proposed offering
possible? J Cavers, A. Leung, P. Ho, S. Hardy
3.
Objectives of the Course
To develop an advanced understanding of desiqri techni
ques for electronic systems.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval ?
Date:
Deprtmeiit ' Chairman
Chairman, SCUS
SCUS73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
.
ENSC 425-4 Electronic System Design
?
[replaces ENSC 425-3 & 494-1]
[2,0,4]
?
Aspects of design using digital and analog integrated circuits as
circuit blocks for the realization of required system functions are
treated, with project activities in the laboratory. Topics include
differential amplifiers; operational amplifiers - non-ideal aspects;
slew rate, gain error, sensitivites. Active filter design, D/A and AID
conversion. MSI and LSI digital circuits, combinational and
sequential: decoders, encoders, multiplexers, ROM's, counters,
controllers. Communication circuits: AM and FM modulators and
demodulators, multiplexers, pulse modulation. Laboratory work is
included in this course.
Prerequisite: ENSC 222
GO
0
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
0
1. Calendar Information
Abbreviation Code:_
EN
SC Course Number: 426
Title of
Course:
?
High Frqu:ncy Elec run ics
Calendar Description of Course:
Department: Erigineerinq Science
Credit Hours: 4
Vector:
3-0-2
See Attached.
Nature of Course Lecture /Laboratory
Prerequisites (or special instructions):
PHYS 324
What course (courses), if any, is being dropped from the calendar if this course is
approved:
2.
Scheduling
How frequently will the course be offered? Once per year.
Semester in which the course will first be offered? 86-3
Which of your present faculty would be available to make the proposed offering
possible?
?
Basil Peters (Adjunct Professor)
3. Obiectives of the Course
Gives the student a detailed exposure to techniques of radio frequency electronics
from both analytical and practical viewpoints.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval ?
Date:
• ______
De '
itme( Cyi.i man
ean
?
Chairman, SCUS
SCUS 73-34b: (When completing
,
this form, for Instructions see Memorandum SCUS 73-34a.
.
ENSC 426-4 High Frequency Electronics
?
[replaces ENSC 426-3 & 49X-1]
[3,0,2]
?
Transmission lines and waveguides, microwave devices, travelling wave
devices. An introduction to the theory of radiation, antennae and wave
propagation, and microwave scattering theory. The design of complete
communication systems incorporating microwave, optical and satellite
channels. Laboratory work is included in this course.
Prerequisite: PHYS 324
L
-I
--j
G
0
Chairman, SCUS
Ci'7
IttL1
SENATE COMMITTEE ON UNDERGRADUATE STUDIES ?
NEW COURSE PROPOSAL FORM
is1. Calendar Information
Abbreviation Code:
FNSC ?
Course Number: 428
Title of Course: Data Communications
Calendar Description of Course:
See Attached.
Department: Engineering Science
Credit Hours: 4
?
Vector:
3-0-2
Nature of Course Lecture/Laboratory
Prerequisites (or special instructions):
ENSC 327 and CMPT 393
What course (courses), if any, is being dropped from the calendar if this course is
approved:
?
ENSC 423-3
2.
Scheduling
How frequently will the course be offered? Once per year.
Semester in which the course will first be offered?
?
87--1
.
?
Which of your present faculty would be available to make the proposed offering
possible?
J. Cavers, P. Ho, D. George
3.
Objectives of the Course
Gives the student a broad
exposure
to problems of data communication at the
lower levels of signal detection, error control, network protocols and perofrmarice.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
...-
• ______
Dea ?
- Chaitnian
SCIJS 73-34b: (When completing this form, for instructions see Memorandum SCtIS 73-34a.
3t t ac Ii Con
I - SC
out I inc )
.
ENSC 428-4 Data Communications
?
[replaces ENSC 428-3 & 49X-1]
[3,0,2] ?
Channel models and detection techniques for digital signalling,
including telephone channels, carrier and bit synch, equalization.
•
?
Retransmission error control: HDLC as a model, software
implementation methods and performance analysis. Forward error
correction: Hamming, cyclic and convolutional codes, Viterbi
algorithm. Packet network and local area network operation,
interfaces., design and performance. Laboratory work is included in
this course.
Prerequisite: ENSC 327 and CMPT 393
.
1
SENATE
COMMITTEE
ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
1. Calendar Information
Abbreviation Code:
ENSC
Course
Number:
429
Title of Course:
Discrete Time Systems
Calendar Description of Course:
See attached.
Department:
Engineering Science
Credit Hours: 4 Vector: 3-0-2
Nature of Course
Lecture/Laboratory
Prerequisites (or special instructions):
ENSC
327
What course (courses), if any, Is being dropped from the calendar If this course is
approved:
ENSC
429-3,
Digital Control Systems
2. Scheduling
How frequently will the course be offered?
Once per year
Semester in
which the course will first be offered?
?
86-3 or 87-1
.
Which of your present faculty would be available to make the proposed offering
possible?
?
Several.
3.
Objectives of the Course
To expand the focus of Digital Control Sytems to general
digital systems.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required In the following areas:
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
-
?
Aloll lif
Department Chairman
?
Chairman, SCUS
6&. -.
—6—
)
SCUS 73-34b: (thcn completing this form, for instructions see Memorandum SCUS 73-34a.
attach courst outi
me)
V ?
H ?
V
ENSC 429-4 Discrete Time Systems
?
[replaces ENSC 429-3 & 49X-1]
[3,0,2]
?
Discrete-time control and signal processing systems, the Z-transform.
Analog-to-digital and digital-to-analog conversion. Digital system
architectures. Applications' in control, filtering, electronics,
signal processing. Introduction to adaptive systems.
?
V
V ?
Prerequisite: ENSC
327
CEr)--- ,-/)L
?
e-'(?
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
. ?
NEW COURSE PROPOSAL FORM
1.
Calendar Information
?
Department:
Engineering Science
Abbreviation Code:ENSC
Course
Number: 460
?
Credit Hours: 4 Vector: 3-0-2
?
Title of Course: Special Topics in Engineering Science
Calendar Description of Course:
See Attached.
Nature of Course Lecture/Laboratory
Prerequisites (or special instructions):
Permission of the Director
What course (courses), if any, is being dropped from the calendar if this course is
approved:
2.
Scheduling
How frequently will the course be offered? As required.
Semester in which the course will first be offered?
?
86-3
Which of your present faculty would be available to make the proposed offering
possible?
?
All
3.
Objectives of the Course
To provide further studies in areas not included in Engineering
Science undergraduate course offerings.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5.
22s_aYii
Date:
.
I)cp. meiit h_man
?
- ?
Chairman, SCUS
SCUS 73-34b: (When completing this form, for Instructions see Memorandum SCUS 73-34a.
ENSC 460-4
Special Topics in Engineering Science
?
(replaces ENSC
460-3 & 49X-1)
ENSC 461-4
Special Topics in Engineering Science
?
[replaces ENSC
461-3 & 49X-1]
ENSG 462-4
Special Topics in Engineering Science
?
[replaces ENSC
462-3 & 49X-1]
[3,0,2] ?
Studies in areas not included within the undergraduate course
offerings of
the
Engineeriig Science Prograw.
Prerequisite: Permission of the
•
Director
.
.
68
r
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
. ?
NEW COURSE PROPOSAL FORM
1.
Calendar Information ?
Department: Engineering Science
Abbreviation Code:
ENSC
Course Number:
461 ?
Credit Hours: 4 Vector: 3-0-2
Title of Course: Special Topics in Engineering Science
Calendar Description of Course:
See Attached.
Nature of Course Lecture/Laboratory
Prerequisites (or special instructions):
Peimission of the Director
What course (courses), if any, is being' dropped from the calendar if this course is
approved:
2. Scheduling
How frequently will the course be offered? As required.
Semester in which the course will first be offered? 87-1
Which of your present faculty would be available to make the proposed offering
possible? ?
All
3. Objectives of the Course
To provide further studies in areas not included in Engineering
Science undergraduate course offerinqs.
4. Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5.
Approval
Date!:
De ?
"it,CIaian
?
Chairman, SCUS
SCUS 73-34b: (When completin
g
this form, for instructions see Memorandum SCUS 73-34a.
rwtl
ENSC 460-4
Special Topics in Engineering Science
?
[replaces
ENSC 460-3 & 49X-1]
ENSC
461-4
Special Topics in Engineering Science
?
[replaces
ENSC 461-3 & 49X-1]
ENSC
462-4
Special Topics in Engineering Science
?
[replaces ENSC
462-3 & 49X-1]
[3,0,2] ?
Studies in areas not included within the undergraduate course
offerings of the Engineering Science Program.
Prerequisite: Permission of the
Director
1 ?
70 ?
.
Chairman, SCUS
fl
(-b)(
ENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
1.
Calendar Information ?
Department:Enqineerinq Science
Abbreviation Code: ENSC Course Number: 462
?
Credit Hours: 'Vector:
3-0-2
Title of Course: Special Topics in Engineering Science
Calendar Description of Course:
See Attached.
Nature of Course Lecture/Laboratory
Prerequisites (or special instructions):
Permission of the Director
What course (courses), if any, is being dropped from the calendar if this course is
approved:
2. Scheduling
How frequently will the course be offered? As required.
Semester in which the course will first be offered? 87-3
. ?
Which of your present faculty would be available to make the proposed offering
possible? ?
All
3.
Objectives of the Course
To provide further studies in areas not included in Engineering
Science undergraduate course offerings.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5.
Date:
•
?
Dep
;n
r.t
me-
k-i
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach course out] the).
[IJ
ENSC 460-4 Special Topics in Engineering Science
?
[replaces ENSC 460-3 & 49X-1]
ENSC 461-4 Special Topics in Engineering Science
?
[replaces ENSG 461-3 & 49X-1]
ENSC 462-4 Special Topics in Engineering Science
?
[replaces ENSC 462-3 & 49X-1]
(3,0,2) ?
Studies in areas not included within the undergraduate course
offerings of the Engineering Science Program.
Prerequisite: Permission of the Director
.
72
Chairman, SCUS
S
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
I
i. Calendar Information
?
Department: Engineering Science
Abbreviation Code:_ENSC Course Number:
-
491 ?
Credit
Hours:
1
Vector: 0-2-0
Title of Course: Special Project Laboratory
Calendar Description of Course:
See attached.
Nature of Course
?
laboratory
Prerequisites (or special instructions):
Permission of the Director
What course (courses), if any, is being dropped from the calendar if this course is
approved:
491-2
2. Scheduling
How frequently will the course be offered?
?
As required.
Semester in which the course will first be offered?
?
86-3
Which of your present faculty would be available to make the proposed offering
possible? ?
All
3.
Objectives of the Course
To allow students to undertake specific laboratory research
in an area outside standard courses.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. pjroval
Date:
?
2
W ?
Department Chairman
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach course outline)
n
L
ENSC 491-1 Special Project Laboratory
ENSC 492-2 Special Project Laboratory
ENSC 493-3 Special Project Laboratory
ENSC 494-4 Special Project Laboratory
These courses are intended for students wishing to pursue laboratory
research on a specific topic outside the standard course offerings.
Each student must be sponsored by a faculty member who will oversee
the project. A proposal of the student's Special Project must be
submitted to the School at least one month prior to the start of the
semester in which the course will be taken. The credit value of the
project will be assessed during this review phase and the student will
be directed to register in the appropriate course.
Prerequisites: Upper Division Standing,
sponsorship of a faculty member and permission of the Director.
.74
1 ?
0
Chairman, SCUS
I
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
0
1. Calendar Information
?
Department: Engineering Science
Abbreviation Code: ENSC Course Number: 492
?
Credit Hours: 2 Vector: 0-4-0
Title of Course:
?
Special Project Laboratory
Calendar Description of Course:
See attached.
Nature of Course ?
Laboratory
Prerequisites (or special instructions):
Permission of the Director
What course (courses), if any, is being dropped from the calendar if this course is
approved: ?
492-2
2.
Scheduling
How frequently will the course be offered? As required
Semester in which the course will
first be
offered? ?
86-3
. ?
Which of your present faculty would be available to make the proposed offering
possible?
All
3.
Objectives of the Course
To allow students to undertake specific laboratory research in an
area outside standard courses.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date: ?
J')
O://y
. ?
(
'l)epartment Chairman
SCUS 73-34b: (When completing this form, for Instructions see Memorandum SCUS 73-34a.
attach course outi me)
ENSC 491-1 Special Project Laboratory
ENSC 492-2 Special Project Laboratory
ENSC 493-3 Special Project Laboratory
ENSC 494-4 Special Project Laboratory
These courses are intended for students wishing to pursue laboratory
research on a specific topic outside the standard course offerings.
Each student must be sponsored by a faculty member who will oversee
the project. A proposal of the student's Special Project must be
submitted to the School at least one month prior to the start of the
semester in which
t
he course will be taken. The credit value of the
project will be assessed during this review phase and the student will
be directed to register in the appropriate course.
Prerequisites: Upper Division Standing,
sponsorship of a faculty member and permission of the Director.
.
10
0
!
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
.
1. Calendar Information
?
Department: Engineering Science
Abbreviation Code:ENSC Course Number:493
?
Credit Hours:3
?
Vector: 0-6-0
Title of Course: Special Project Laboratory
Calendar Description of Course:
See attached.
Nature of Course
Laboratory
Prerequisites (or special instructions):
Permission of the Director
What course (courses), if any, is being dropped from the calendar if this course is
approved:
493-2
2. Scheduling
How frequently will the course be offered? As required.
Semester in which the course will first be offered?
?
86-3
S
?
Which of your present faculty would be available to make the proposed offering
possible?
All
3.
Objectives of the Course
To allow students to undertake specific laboratory research in an
area outside standard courses.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: NIL.
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval
Date:
?
D) C)c(/j
•
Department Chairman
/Vv/r
an an
Chairman, SCUS
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach course outline).
ENSC 491-1 Special Project Laboratory
ENSC 492-2 Special Project Laboratory
ENSC 493-3 Special Project Laboratory
ENSC 494-4 Special Project Laboratory
These courses are intended for students wishing to purs'ie laboratory
research on a specific topic outside the standard course offerings.
Each student must be sponsored by a faculty member who will oversee
the project. A proposal of the student's Special Project must be
submitted to the School at least one month prior to the start of the
semester in which the course will be taken. The credit value of the
project will be assessed during this review phase and the student will
be directed to register in the appropriate course.
Prerequisites: Upper Division Standing,
sponsorship of a faculty member and permission of the Director.
S
78 ?
.
SENATE COMMITTEE ON
UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
1.
Calendar Information
?
Department: Engineering Science
Abbreviation Code: ENSC Course Number:
?
Credit Hours: '
?
Vector: 0-8-0
Title of Course: ?
Special Project Laboratory
Calendar Description of Course:
See attached.
Nature of Course
?
Laboratory
Prerequisites (or special instructions):
Permission of the Director
What course (courses), if any, is being dropped from the calendar if this course is
approved:
494-2
2. Scheduling
How frequently will the course be offered?
?
As required.
Semester in which the course will first be offered?
?
86-3
is ?
possible?
of your present faculty would be available to make the proposed offering
possible? ?
All
3.
Objectives of the Course
To allow students to undertake specific laboratory research in an
area outside standard courses.
4.
Budgetary and Space Requirements (for information only)
What
additional resources will be required in the following areas: NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. pJoval
?
A1
0
Date: ?
2 ? V/^
'Department' Chairman
?
Chairman, SCUS
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach
cou rsi
outline).
ENSC 491-1 Special Project Laboratory
ENSC 492-2 Special Project Laboratory
ENSC 493-3 Special Project Laboratory
ENSC 494-4 Special Project Laboratory
These courses are intended fOr students wishing to pursue laboratory
research on a specific topic outside the standard course offerings.
Each student must be sponsored by A faculty member who will oversee
the project. A proposal of the stUdèñt's Special Project "
mu st be
submitted to the School at least one month prior to the start of the
semester in which the course will be taken. The credit value of the
Project will be assessed during this review phase and the student will
be directed to register in the appropriate course.
.
r
-
?
?
Prerequisiteè: Upper Division Standing,
sponsorship of a faculty member and permission of the Director.
80
0
5. Approval
Date: ?
. )
?
Dc
.
/ ?
Department
Chairman
Chairman, SCUS
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
l. Calendar Information
?
Department:Engineering Science
Abbreviation Code:ENSC Course Number:495
?
Credit Hours:1 Vector: 0-0-2
Title of Course: Introduction to Microelectronic Fabrication
Calendar Description of Course:
See attached.
Nature of Course ?
Laboratory
Prerequisites (or special instructions):
Upper Division Standing
What course (courses), if any, is being dropped from the calendar if this course is
approved:
2.
Scheduling
How frequently will the course be offered? Once per year, as required.
Semester in which the course will first be offered? 86-3 or 87-1
Which of your present faculty would be available to make the proposed offering
possible?
?
Dr. A.M. Leung
3. Objectives of the Course
To provide an introduction to microelectronic fabrication
processes to Engineering Physics students.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None
Faculty
Staff ?
Facility is being installed now.
Library
Audio Visual
Space
Equipment
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
;ittn('h courst'
Outline).
ENSC 495-1 Introduction to Microelectronic Fabrication
[0,0,2] ?
A review of microelectronic fabrication processes in greater depth
than in regular electronics courses. Laboratory project work is
involved. Intended for students in the Engineering Physics option.
Prerequisite: Upper Division Standing
S
S
Chairman, SCUS
woe
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
?
NEW COURSE PROPOSAL FORM
1.
Calendar Information
?
Department: Engineering Science
Abbreviation Code:
ENSC ?
Course Number:________
?
Credit Hours: 0 Vector:
Title of Course: Internship I
Calendar Description of Course:
See Attached.
Nature of Course
?
Practicum
Prerequisites (or special instructions):
What course (courses), if any, is being dropped from the calendar if this course is
approved:
2. Scheduling
How frequently will the course be offered?
?
As required.
Semester in which the course will first be offered?
?
86-2
Which of your present faculty would be available to make the proposed offering
possible? ?
All
3. Objectives of the Course
To gain relevant practical experience and to prepare for ENSC 498 and 499.
4. Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas: None
Faculty
Staff
Library
Audio Visual
Space
Equipment
5. Approval ?
Date:
• ______
Depa ment
ChaLran
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
ENSC 497-0 Internship I
This is the first session of the compulsory internship and consists of
a semester of work experience arranged through the school's Industrial
Internship Co-ordinator. The objective of this session is to gain
relevant practical experience and to prepare for ENSC 498 and 499,
where the project work intensifies and the student's undergraduate
thesis is written. ENSC 497 is normally taken before the seventh
academic semster.
.
.
84 ?
.
Chairman, SCUS
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
NEW COURSE PROPOSAL FORM
0
Calendar Information
Abbreviation Code:
E N SC
Course
Number:498
Title of Course:
Internship .11
Calendar Description of Course:
?
See attached.
Department:
Engineering Science
Credit Hours: 3 Vector:
n/a
Nature of Course
?
Research Project
Prerequisites (or special instructions):
ENSC
497
What course (courses), if any, is being dropped from the calendar if this course is
approved:
ENSC
499-11
will be reduced to
9
semester-hours
2.
Scheduling
Flow frequently will the course be offered?
As required.
Semester in which the course will first be offered? ?
86-3
. Which of your present faculty would be available to make the proposed offering
possible?
?
All
3. Obiectives of the Course
To provide a more structured and orderly process for the
undergraduate project and thesis requirement.
4.
Budgetary and Space Requirements (for information only)
What additional resources will be required in the following areas:
?
NIL
Faculty
Staff
Library
Audio Visual
Space
Equipment
5.p-p__
Date: ?
(L /ç -
. ?
// -- )
?
-- p
Department Chairman
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
attach course outline).
ENSC 498-3 Internship II
This is the second session of compulsory internship and is usually
taken during the seventh academic semester. The student's time in
this course is devoted to supervised study, research and development
and work leading to a formal proposal for the project work in ENSC
499. This activity can be directly augmented by other course work and
by directed study. The locale of the work may be external to the
University or within a University laboratory, or may bridge the two
locations. Supervision may be by the company sponsoring the
internship or by faculty members, or through some combination. A
proposal for the student's ENSC 498 activities must be submitted to
the School at least one month prior to the start of the semester in
which the course will be taken. Prèparátion of the undergraduate
thesis project proposal is the formal requirement of this course and
the basis upon which it is graded. Grading will be on a Pass/Fail
basis.
Prerequisite: ENSC 497
S
0
Pre euj51k ()ha.
C d'rt
Cc
LiS
SENATE COMMITTEE ON UNDERGRADUATE STUDIES
0 ?
NEW COURSE PROPOSAL FORM
1.
Calendar Information
?
Department: Engineering Science
Abbreviation
Code:'.jSC
Course Number: 499
?
Credit Hours: _Vector:_______
Title of Course:
?
Iriqirieeririq
Science Project
Calendar Description of Course:
See Attached.
Nature of Course
?
Thesis
Prerequisites (or special instructions):
ENSC 498
What course (courses), if any, is being dropped from the calendar if this course is
approved: ?
E;NSC 499-11
2. Scheduling
How frequently will the course be offered? As required.
Semester in which the course will first be offered? 86-1
Which of your present faculty would be available to make the proposed offering
possible?
?
All
3.
Objectives of the Course
To generate a thesis based on the research, develoent and engineering project
undertakurl
in the student ' s internship.
4. Budgetary and Space Requirements (for information only)
What
additional resources will be required in the following areas
Faculty
Staff
Library
Audio Visual
Space
Equipment
None.
5. A
pprov
al
0
Date:
?
t
JL1
D
ep`S^tm en t"Chai
?
D eon'
?
Chairman, SCUS
I
SCUS 73-34b: (When completing this form, for instructions see Memorandum SCUS 73-34a.
ENSC 499-9 Engineering Science Project
?
[replaces ENSC 499-11]
A thesis is based on the research, development and engineering
project undertaken in the student's internship. Registration for
ENSC 499 takes place in the semester in which the thesis will be
presented and defended, normally during Semester 8. Formal approval
of the topic by the School of Engineering Science is given by the
granting of the grade of Pass for ENSC 498. The locale of the work,
supervision and other arrangements follow those for ENSC 498.
Grading of the thesis will be on a Pass/Fail basis, but recognition
will be given to outstanding work.
Prerequisite: ENSC 498
b'
j
7
LJI
